AUR31316

Certificate III in Automotive Engine Reconditioning

Set yourself apart and advance your career in the automotive industry with this technical engine reconditioning qualification.

STUDY LOCATIONS Greater Brisbane

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Get equipped with the practical skills to work as an engine reconditioner in the automotive service and repair industry. Whether you are a new employee or existing worker, this course will upgrade your skills to set up and operate machinery for reconditioning vehicle components.

According to the Australian Government's Job Outlook service, demand for qualified mechanics (including engine reconditioners) grew strongly over the past five years with employers finding it hard to fill vacancies. Job openings are expected to remain steady in the near future with around 23,000 job opening expected over the next five years.

In this course you will learn to undertake pre-repair operations such as diagnosis, dismantling engines and evaluating components, conducting test procedures, overhauling engines, and rebuilding and reclaiming engine components. Industry experienced teachers are ready to prepare you for a future in the automotive industry.

Through successful completion of this course you will attain a broad range of knowledge and practical skills to work as an automotive engine reconditioner or continue your studies at a higher level.

What can I do?

Automotive Engine Reconditioner

Course outcome:

AUR31316 Certificate III in Automotive Engine Reconditioning

Trade skills assessment and gap training program

If you can demonstrate substantial competency in this qualification, you may be able to access funding for recognition of prior learning and gap training through the Trade Skills and Assessment Gap Training (TSAGT) program. TAFE Queensland is a proud recipient of funding from the Queensland Government, Department of Employment, Small Business and Training (DESBT) for this program. Only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

Free apprenticeships for under 25s

The Queensland government is supporting young Queenslanders up to the age of 25 by providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core and 15 elective units from the list below.

UNIT CODE
UNIT NAME

UNIT CODE
AURAEA002

Follow environmental and sustainability best practice in an automotive workplace

UNIT CODE :
AURAEA002

Unit description :
This unit describes the performance outcomes required to follow environmental and sustainability best practices, including complying with established workplace procedures and environmental regulations as well as following sustainability practices that may reduce the environmental impact of work practices and outputs. It applies to those working in the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Follow environmental and sustainability best practice in an automotive workplace

UNIT CODE
AURASA002

Follow safe working practices in an automotive workplace

UNIT CODE :
AURASA002

Unit description :
This unit describes the performance outcomes required to identify and follow safety and emergency procedures in an automotive workplace. It involves those safety procedures to be followed when using workplace hand tools and hand-held power tools, fixed equipment, and chemicals, and when running vehicles and machinery. It includes the individualâ€™s responsibility for safety and emergency response in the event of an accident or incident. It applies to those working on agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant machinery or outdoor power equipment in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Follow safe working practices in an automotive workplace

UNIT CODE
AURMTA007

Conduct non-destructive testing

UNIT CODE :
AURMTA007

Unit description :
This unit describes the performance outcomes required to perform non-destructive testing on vehicle components and materials. It involves preparing for non-destructive testing, testing components and materials in order to determine component suitability and serviceability, and completing workplace processes. It applies to those working in the motor sport industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Conduct non-destructive testing

UNIT CODE
AURTTE001

Apply knowledge of engine science

UNIT CODE :
AURTTE001

Unit description :
This unit describes the performance outcomes required to apply knowledge of the construction and operation of engines and their components during engine repair or reconditioning activities. It involves identifying engine components and describing their function. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Apply knowledge of engine science

UNIT CODE
AURTTK001

Use and maintain measuring equipment in an automotive workplace

UNIT CODE :
AURTTK001

Unit description :
This unit describes the performance outcomes required to select, use, maintain and store automotive measuring equipment. It involves selecting and maintaining measuring equipment, and using measuring equipment to determine length, width, angles, ovality, depth, out of square, clearances, run-out, pressure and temperature of automotive components and materials. It applies to those working in all sectors of the automotive industry. This unit does not apply to electrical measuring equipment that measures voltage, resistance or current flow. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Use and maintain measuring equipment in an automotive workplace

UNIT CODE
AURTTK002

Use and maintain tools and equipment in an automotive workplace

UNIT CODE :
AURTTK002

Unit description :
This unit describes the performance outcomes required to select, use, maintain and store tools and equipment in an automotive workplace. It applies to those working in all sectors of the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Use and maintain tools and equipment in an automotive workplace

UNIT CODE
AURTTM002

Repair bearing tunnels and connecting rods in engines

UNIT CODE :
AURTTM002

Unit description :
This unit describes the performance outcomes required to repair bearing tunnels and connecting rods in engines. It involves preparing for the task, line boring and honing engine bearing tunnels, repairing connecting rods to specifications and workplace requirements in an engine reconditioning process, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine components include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Repair bearing tunnels and connecting rods in engines

UNIT CODE
AURTTM004

Assemble engine blocks and sub-assemblies

UNIT CODE :
AURTTM004

Unit description :
This unit describes the performance outcomes required to assemble a short engine block and sub-assemblies, and check clearances and tolerances in an engine reconditioning process. It involves preparing for the task, selecting the correct assembly procedure, carrying out the assembly and performing post-assembly testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine blocks and sub-assemblies include those in vehicles from all sectors of the industry. This unit does not cover fitting semi-finished sleeves, or boring and honing cylinders. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Assemble engine blocks and sub-assemblies

UNIT CODE
AURTTM007

Carry out crankshaft grinding

UNIT CODE :
AURTTM007

Unit description :
This unit describes the performance outcomes required to carry out grinding operations on engine crankshafts to specific under sizes. It involves preparing for the task, determining crankshaft damage and required repair action, preparing and using grinding machines to grind crankshafts to specifications, tolerances and workplace requirements, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The crankshafts include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication
UNIT NAME
Carry out crankshaft grinding

UNIT CODE
AURTTM008

Dismantle and evaluate engine blocks and sub-assemblies

UNIT CODE :
AURTTM008

Unit description :
This unit describes the performance outcomes required to dismantle and evaluate an engine block and its sub-assemblies as part of an engine repair or reconditioning process. It involves preparing for the task, dismantling and evaluating the engine blocks and sub-assemblies, determining required repair action, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine blocks and sub-assemblies include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Dismantle and evaluate engine blocks and sub-assemblies

UNIT CODE
AURTTM009

Fit sleeves and bore and hone engine cylinders

UNIT CODE :
AURTTM009

Unit description :
This unit describes the performance outcomes required to fit sleeves to restore engine cylinder blocks and to bore and hone the sleeves to specific tolerances. It involves preparing for the task, assessing damage and determining required repair action, boring, sleeving and honing engine cylinders, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engines include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication
UNIT NAME
Fit sleeves and bore and hone engine cylinders

UNIT CODE
AURTTM011

Recondition engine cylinder heads

UNIT CODE :
AURTTM011

Unit description :
This unit describes the performance outcomes required to recondition engine cylinder heads as part of an engine reconditioning process.
UNIT NAME
Recondition engine cylinder heads

UNIT CODE
AURTTW003

Carry out machining operations

UNIT CODE :
AURTTW003

Unit description :
This unit describes the performance outcomes required to carry out machining operations on a range of automotive components to specific tolerances. It involves preparing for the task, selecting the correct machining operation, setting up and machining components to specifications, and completing workplace processes and documentation. It also involves restoring surface finishes and tolerances, and aligning components. It applies to those working in the automotive service and repair industry. The machining operations apply to those using lathes, and milling or surface grinding machines. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Carry out machining operations

UNIT CODE
UNIT NAME

UNIT CODE
AURAQA002

Inspect technical quality of work in an automotive workplace

UNIT CODE :
AURAQA002

Unit description :
This unit describes the performance outcomes required to gather information to inspect work done by colleagues to support workplace quality outcomes. It involves demonstrating discretion, judgement and problem-solving skills in managing own work activities and contributing to a productive team environment. It applies to those working in service, repair, sales or office administration job roles in the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect technical quality of work in an automotive workplace

UNIT CODE
AURATA001

Identify basic automotive faults using troubleshooting processes

UNIT CODE :
AURATA001

Unit description :
This unit describes the performance outcomes required to conduct basic troubleshooting processes to identify common automotive faults or problems based on evidence provided by customers. It applies to those identifying basic automotive faults in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant machinery or outdoor power equipment in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Identify basic automotive faults using troubleshooting processes

UNIT CODE
AURLTE002

Diagnose and repair light vehicle engines

UNIT CODE :
AURLTE002

Unit description :
This unit describes the performance outcomes required to diagnose and repair faults in the spark ignition engines and compression ignition engines of light vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engines include those in light vehicles or light commercial vehicles. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Diagnose and repair light vehicle engines

UNIT CODE
AURTTA005

Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE :
AURTTA005

Unit description :
This unit describes the performance outcomes required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry. It involves preparing for the task, selecting and using sealants and adhesives, preparing and installing bearings, seals and gaskets, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry, It includes agricultural machinery, heavy commercial vehicles, light vehicle, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE
AURTTA018

Carry out diagnostic procedures

UNIT CODE :
AURTTA018

Unit description :
This unit describes the performance outcomes required to carry out diagnostic procedures on vehicles, vessels or machinery. It involves confirming the existence of a fault, choosing the appropriate diagnostic procedure and tools, applying the diagnostic procedure, and reporting conclusions. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Carry out diagnostic procedures

UNIT CODE
AURTTC001

Inspect and service cooling systems

UNIT CODE :
AURTTC001

Unit description :
This unit describes the performance outcomes required to inspect and service air and liquid cooling systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, reporting the inspection findings, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The cooling systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycle or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service cooling systems

UNIT CODE
AURTTE004

Inspect and service engines

UNIT CODE :
AURTTE004

Unit description :
This unit describes the performance outcomes required to inspect and service engines. It involves preparing for the task, inspecting the engine, reporting the inspection findings, servicing and adjusting the engine, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engines include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant or motorcycles. The unit does not apply to outdoor power equipment engines. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service engines

UNIT CODE
AURTTF002

Inspect and service diesel fuel injection systems

UNIT CODE :
AURTTF002

Unit description :
This unit describes the performance outcomes required to inspect and service diesel fuel injection systems. It involves preparing for the task, inspecting the fuel injection system for leaks, inspecting the air filter, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The diesel fuel injection systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service diesel fuel injection systems

UNIT CODE
AURTTF005

Diagnose and repair engine forced-induction systems

UNIT CODE :
AURTTF005

Unit description :
This unit describes the performance outcomes required to diagnose and repair faults in engine forced-induction systems. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. Forced-induction systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Diagnose and repair engine forced-induction systems

UNIT CODE
AURTTM005

Balance rotating and reciprocating engine components

UNIT CODE :
AURTTM005

Unit description :
This unit describes the performance outcomes required to balance rotating and reciprocating engine components. It involves preparing for the task, determining and performing the balancing requirements for the engine component in an engine reconditioning process, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine components include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Balance rotating and reciprocating engine components

UNIT CODE
AURTTM010

Heat treat, straighten and reclaim engine components

UNIT CODE :
AURTTM010

Unit description :
This unit describes the performance outcomes required to apply heat treatment and straightening techniques to repair damaged or under sized engine components, and perform the necessary machining to reclaim engine components in an engine reconditioning process. It involves preparing for the task, heat treating, straightening and reclaiming engine components, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine components include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Heat treat, straighten and reclaim engine components

UNIT CODE
AURTTM012

Carry out camshaft grinding

UNIT CODE :
AURTTM012

Unit description :
This unit describes the performance outcomes required to grind engine camshafts to specific under sizes. It involves preparing for the task, determining camshaft damage and required repair action, preparing and using grinding machines to grind camshafts to specifications and workplace requirements, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The camshafts include those of engines in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Carry out camshaft grinding

UNIT CODE
AURVTW001

Carry out manual metal arc welding on components

UNIT CODE :
AURVTW001

Unit description :
This unit describes the performance outcomes required to prepare and weld components using the manual metal arc welding (MMAW) process. It involves preparing for the task, selecting, setting up and operating MMAW equipment, identifying and selecting welding electrodes appropriate to welding requirements, selecting and using suitable personal protective equipment (PPE), performing welding to required standard and specifications, inspecting weld quality, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Carry out manual metal arc welding on components

UNIT CODE
AURVTW004

Carry out tungsten inert gas welding

UNIT CODE :
AURVTW004

Unit description :
This unit describes the performance outcomes required to carry out welding operations using tungsten inert gas (TIG) welding. It involves preparing for the task, selecting and using TIG welding equipment, setting gas flow pressures and welder settings, selecting and using suitable personal protective equipment (PPE), performing welding to given specifications, inspecting and testing weld quality, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Carry out tungsten inert gas welding

UNIT CODE
AURVTW018

Carry out oxyacetylene welding, thermal heating and cutting

UNIT CODE :
AURVTW018

Unit description :
This unit describes the skills and knowledge required to carry out basic welding, thermal heating and cutting operations.
UNIT NAME
Carry out oxyacetylene welding, thermal heating and cutting

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Automotive Engine Reconditioning (AUR31316)

Ask a question

Certificate III in Automotive Engine Reconditioning

COURSE CODE: AUR31316

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

Selection criteria

To study an apprenticeship or traineeship program you must be indentured as an apprentice or trainee with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Resources required

Work wear and Personal Protective Equipment (PPE)

Students who do not meet these minimum standards of work wear and PPE will not be permitted entry into workshops. Protective clothing – long cotton drill trousers, and short or long-sleeved cotton drill shirt
Eye protection – must comply with AS1336 or AS1337
Protective footwear – safety toe, leather upper, non-slip – must comply with AS2210
Hair protection – peak cap with a snood capable of fully containing hair

General equipment
Training Record Book
Calculator (scientific)
Pen – blue/black/red
Notebook
Pencil – HB and 2H
Eraser
Sharpener
Yellow highlighter
USB stick (recommended)

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of Prior Learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses